Marine Travertine now available in three coastal-friendly finishes

Why coastal projects need a different finish
Salt spray,constant humidity and strong UV are a punishing combination for wall finishes. Standard panels can chalk, fade or develop efflorescence when salts migrate through the surface. The new Marine Travertine finishes were developed to resist exactly that failure mode.
Each finish uses a low-alkali binder system, which reduces the free lime available to react with moisture and salts. The result is a surface that holds its colour and texture through repeated wet-dry cycles.
Three finishes, one structure
The range now covers three tones: a light shell, a neutral sand and a deeper reef. All three share the same flexible modified-clay substrate and the same mechanical profile, so specifiers can mix tones across a scheme without changing the fixing detail.
The panels remain around 3 mm thick and roughly 1.2 kg per square metre. They are water-resistant, wipe-clean and rated A2 for fire reaction — the same practical benefits as the standard range, with a finish tuned for marine exposure.
Where it is being specified
Early interest has come from poolside changing rooms, beachfront villa facades and resort corridors — all locations where a natural stone look is wanted but maintenance access is limited.
We recommend ordering a project sample set and, for海边 elevations, reviewing the fixing and drainage detail with our technical team before installation.
Key facts
- Three coastal tones: shell, sand, reef
- Low-alkali binder resists salt efflorescence
- Salt-spray tested and colour-stable under UV
- ~3 mm, ~1.2 kg/m2, A2 fire reaction
Frequently asked questions
What makes these finishes coastal-friendly?
A low-alkali binder system reduces free lime that would otherwise react with salt and moisture, and the finishes are salt-spray tested for colour and surface stability.
What are the three finishes?
A light shell, a neutral sand and a deeper reef tone. All share the same substrate and fixing detail, so they can be combined in one project.
Can they be used poolside?
Yes. They are water-resistant, wipe-clean and do not rot, which suits poolside changing rooms and wet areas.
Will the colour fade in strong sun?
The pigments are colour-stable and UV-resistant. We still recommend viewing a physical sample under your site lighting before ordering.
Are they heavier than standard panels?
No — they are about 1.2 kg lighter per square metre than a standard mineral-finish panel, at roughly 3 mm thick.
Do I need a special adhesive outdoors?
Use a quality exterior thin-set adhesive and follow the substrate preparation guide. Our technical team can advise on coastal fixing details.
Can I mix the three tones on one elevation?
Yes. Because all three share the same profile, you can combine tones freely while keeping one fixing system.
How do I clean salt residue?
Rinse with clean water and wipe with a soft cloth. The non-porous surface does not absorb salt, so residue lifts easily.
Is there a minimum order?
Please contact our team with your quantity and destination — we can accommodate both sample orders and full project batches.
Can I get a sample set of all three?
Yes. We recommend a project sample set so you can compare the tones against your materials on site.
Have a project in mind?
Our team can help with samples, specifications and a quote.
Talk to our team →

