3D Travertine panel delivered to a Dubai boutique hotel lobby

The brief: warm, tactile, and fast to install
The lobby called for a 40 sqm feature wall that would read as natural limestone possession but arrive on a schedule measured in days, not weeks. The specification settled on our 3D Travertine in a warm ivory tone, supplied in large-format panels that reduce the number of visible joints.
Each panel is a thin, flexible modified-clay sheet with a real travertine texture pressed into the surface. At roughly 3 mm thick and around 1.2 kg per square metre, the material can be handled by two installers and set directly over the prepared substrate — no heavy lifting rig, no structural reinforcement.
What the relief does in a hotel lobby
Under the lobby wall-washers, the 3 mm relief casts a soft, moving shadow that changes with the time of day. Designers often specify 3D Travertine exactly for this: it gives a plain wall depth and movement that flat prints and paint cannot reproduce.
The finish is colour-stable and wipe-clean, which matters in a high-traffic reception area. Because the panels are water-resistant and rated A2 for fire reaction, they also satisfy the practical requirements that come with a hospitality fit-out.
From Foshan to Jebel Ali
The panels were batched together so the entire feature wall shares one dye lot — a detail we log by spectrophotometer reading before shipment. Packed flat, the 40 sqm consignment occupied a fraction of the volume of equivalent stone tile, keeping freight cost and lead time down.
Installation was completed over a long weekend with a standard thin-set adhesive. The client has asked us to document the finished lobby for the Projects section, with interior shots to follow.
Key facts
- Large-format panels, ~3 mm thick, ~1.2 kg/m2
- Real travertine relief — depth that shifts with wall-washing light
- A2 fire reaction, water-resistant and wipe-clean
- One dye lot held for the full 40 sqm feature wall
Frequently asked questions
What exactly is 3D Travertine?
A flexible modified-clay panel with a genuine travertine texture pressed into the surface. It is a fraction of the weight and thickness of quarried travertine and is supplied in large, lightweight sheets.
How thick and heavy is it?
Around 3 mm thick and approximately 1.2 kg per square metre, so two installers can handle a full-size panel without lifting equipment.
Can it be used in a hotel lobby?
Yes. It is water-resistant, easy to clean and rated A2 for fire reaction, which suits high-traffic hospitality interiors and reception areas.
Will the relief look flat under light?
No. The 3 mm texture casts soft moving shadows under grazing or wall-washing light, giving the surface visible depth that changes through the day.
How is it installed?
It is set with a standard thin-set adhesive over a prepared, flat substrate. Panels can be cut on site with a utility knife — no wet saw required.
Can I match panels across a large wall?
Yes. We batch each order together and log the colour by spectrophotometer reading, so a feature wall can be supplied from one consistent dye lot.
Is it suitable for Dubai climate?
Yes. The material is water-resistant and colour-stable, and it does not support rot or mould, making it suitable for interior feature walls in warm climates.
How long does shipping take?
Because the panels are thin and packed flat, freight volume is far lower than stone. Contact us with your quantity and destination for a current lead time.
Can I get samples before ordering?
Yes. We send physical samples so you can judge the relief and colour under your own lighting before committing to a full order.
Do you supply other textures?
Yes. The 3D range includes Travertine, Rammed Earth and other textures. Ask our team for the full texture card.
Have a project in mind?
Our team can help with samples, specifications and a quote.
Talk to our team →

