A Nairobi contractor's note on installation speed

Two days versus three weeks
The contractor’s comparison is about more than the panels themselves. Ceramic tile on the same apartment block meant mixing adhesive, wet-cutting each piece, and waiting for beds to cure before grouting. The flexible stone panels were cut with a utility knife and set over a prepared substrate with a thin-set adhesive.
Because each panel is around 3 mm thick and roughly 1.2 kg per square metre, lifting material to the third floor was a two-person job with no hoist — a small change that removed a full day of handling on site.
Why installers notice the weight
Weight drives most of the hidden cost in a cladding job: handling time, safety setup, and fatigue. A lighter panel changes all three. Our client specifically mentioned that lifting was effortless on the upper floor, which kept the crew moving through the working day.
The panels also cut cleanly with hand tools, so there was no wet saw, no water on site and no dust from grinding — useful on an occupied residential building.
A repeat specification
The client has committed to specifying the material on the next three units in the same development. For us, repeat orders like this are the clearest signal that a product works in the field, not just in a catalogue.
Key facts
- Installed in 2 days vs 3 weeks for tile
- ~3 mm thick, ~1.2 kg/m2 — easy upper-floor handling
- Cuts with a utility knife, no wet saw or grout
- Client re-specified on the next three units
Frequently asked questions
Is flexible stone really faster than tile?
In most interior applications yes. It cuts with a utility knife, sets with a thin-set adhesive and needs no grouting or curing wait, which removes several steps from a tile installation.
What tools do I need?
A utility knife, a straight edge and a standard thin-set adhesive cover most installations. No wet saw or heavy lifting gear is required.
How heavy is it?
Around 1.2 kg per square metre at roughly 3 mm thick, so two installers can carry full-size panels up several floors without a hoist.
Can it go over existing surfaces?
Provided the substrate is sound, flat and clean, panels can often be set over an existing wall. Check the substrate guide or ask our team.
Does it need grout?
No. Panels are butted together with a fine joint, so there is no grout line to mix, apply or re-point later.
Is it suitable for apartments?
Yes. It is light, quiet to install and rated A2 for fire reaction, which suits multi-unit residential projects.
Can one installer handle it?
A single installer can manage most panels, though two people make handling full-size sheets on upper floors easier.
How do I cut around outlets?
Mark the opening and cut with a sharp utility knife. The material takes a clean edge without crumbling.
Is there an installation guide?
Yes. We provide a substrate and fixing guide, and our technical team can answer site-specific questions.
Where can I read more client projects?
See the Projects section and our blog for more delivered cases from Africa, the Middle East and Asia.
Have a project in mind?
Our team can help with samples, specifications and a quote.
Talk to our team →

