PRODUCT / WOVEN

Woven

A flexible stone wall panel by INDECO — A woven textile relief — interlaced lines that add soft rhythm to walls and ceilings.

AT A GLANCE

Built light, built to read as stone

2–4 mmUltra-thin profile
2.7–7.2 kg/m²Lightweight panels
1–3 degreesBatch colour variation
≥ 90%Full-bed adhesive coverage

ABOUT THIS PRODUCT

About Woven

A woven textile relief — interlaced lines that add soft rhythm to walls and ceilings. INDECO Woven is a thin, flexible stone veneer built on a modified-clay backing, so it bends around curves, columns and radii that rigid tile cannot reach. At just 2–4 mm thick and 2.7–7.2 kg/m², it installs with standard tile adhesive and reads as solid stone at a fraction of the weight.

Every panel is produced in our Foshan facility under ISO-controlled production, with colour matched across batches (1–3 degrees variation). We support OEM / ODM texture development, free samples and low MOQ for project buyers, contractors and designers.

Every panel is produced in our Foshan facility under ISO-controlled production, with colour matched across batches. We support OEM / ODM texture development, free samples and low MOQ for project buyers, contractors and designers.

Distinctive texture

A woven textile relief — interlaced lines that add soft rhythm to walls and ceilings.

Flexible backing

A modified-clay backing lets the panel bend around columns, curves and radii.

Lightweight stone

Only 2–4 mm thick and 2.7–7.2 kg/m² — a fraction of the weight of rigid stone tile.

Project-ready

OEM / ODM texture development, free samples and low MOQ for project buyers.

QUALITY & MANUFACTURING

Consistent, batch after batch

Produced in our Foshan facility under ISO-controlled production, with size and colour checked panel by panel so the last crate matches the first.

ISO-controlled production

Produced in our Foshan facility under controlled production.

Batch colour matching

Colour matched across batches to 1–3 degrees variation.

Consistent sizing

Panel sizes held to tolerance, checked panel by panel.

WHERE IT WORKS

Applications

Interior walls

Feature walls, reception areas and interior cladding with a real-stone finish.

Exterior facades

Lightweight facade cladding that adds minimal load to the structure.

Curved surfaces

Columns, radii and curved walls that rigid stone tile cannot reach.

SPECIFICATION

Technical Specifications

Panels are made to order. The table lists the standard specification; anything outside these ranges is quoted on request.

MaterialModified clay material with natural stone surface
Thickness2–4 mm
Weight2.7–7.2 kg/m²
Panel size600×1200 / 600×2400 / 600×3000 mm
Size tolerance±2 mm / ±10 mm
Colour variation1–3 degrees
Joint2 mm natural seam
Adhesive coverage≥ 90% full-bed application
ApplicationInterior walls, exterior facades, curved surfaces
OptionsOEM / ODM texture development, free samples, low MOQ

BUYING GUIDE

Procurement at a glance

The figures below are the framework we quote against. Project-specific numbers are confirmed at enquiry.

Minimum orderLow MOQ — project-friendly quantities
SamplesFree samples available on request
CustomisationOEM / ODM texture development supported
Lead timeConfirmed at enquiry
PricingProject-specific — quoted on request

FAQ

Woven: Frequently Asked Questions

What is Woven?

A flexible stone wall panel by INDECO — A woven textile relief — interlaced lines that add soft rhythm to walls and ceilings. It is a thin, flexible stone veneer on a modified-clay backing that bends around curves rigid tile cannot reach.

How thin and light is it?

The panel is 2–4 mm thick and weighs 2.7–7.2 kg/m² — a fraction of conventional stone tile.

Can it be used on exterior facades?

Yes. It is specified for interior walls, exterior facades and curved surfaces, and installs with standard tile adhesive.

Can it bend around columns and curves?

Yes. The flexible modified-clay backing lets it wrap columns, radii and curved walls.

What panel sizes are available?

Standard sizes are 600×1200 / 600×2400 / 600×3000 mm, with size tolerance held to ±2 mm / ±10 mm.

How is colour variation controlled?

Colour is matched across batches to 1–3 degrees variation under ISO-controlled production in our Foshan facility.

How is it installed?

With standard tile adhesive at ≥ 90% full-bed application and a 2 mm natural seam joint.

Do you offer OEM / ODM?

Yes — custom texture development is supported for project buyers, contractors and designers.

Can I get samples?

Yes. Free samples are available on request so you can check texture and colour before ordering.

What is the minimum order quantity?

We keep MOQ low and support project-friendly quantities. Confirm exact terms at enquiry.

START A PROJECT

Specify Woven for your next project

  • No-obligation enquiry
  • Detailed proposal on request
  • Free samples before you commit
  • OEM / ODM texture development
  • Project-specific pricing
  • Support from enquiry to delivery

RELATED PRODUCTS

You may also like

Chat with us