Wood-Texture range: real grain, zero rot

The look of wood, none of the upkeep
Timber cladding is beautiful but demanding outdoors or in wet areas: it needs sealing, it moves with moisture, and in humid climates it can rot. The Wood-Texture range keeps the grain and warmth of oak and ash in a material that needs none of that maintenance.
The texture is pressed into a thin flexible sheet, so the grain reads clearly at both a distance and up close.
Built for wet rooms and humid air
Because the panels are mineral-based rather than timber, they are water-resistant and do not support rot or mould. They are wipe-clean, colour-stable under UV and rated A2 for fire reaction.
At roughly 3 mm thick and 1.2 kg per square metre, they add minimal load and can be set over a prepared substrate with a thin-set adhesive.
Where designers are using it
Early applications include spa walls, wet-room feature panels and humid-climate facades. Clients choose it where they want the visual warmth of wood but cannot accept the maintenance cycle that real timber requires.
Ask our team for the full tone card and a project sample set before specifying.
Key facts
- Real oak and ash grain in a mineral panel
- No warping, rot or varnishing
- Water-resistant, wipe-clean, A2 fire reaction
- ~3 mm, ~1.2 kg/m2 — minimal load
Frequently asked questions
Is it real wood?
No. It is a flexible modified-clay panel with a realistic oak or ash grain pressed into the surface — the look of wood with none of the maintenance.
Can it be used in wet rooms?
Yes. It is water-resistant and does not support rot or mould, which makes it suitable for bathrooms, spas and humid interiors.
Does it need varnishing or sealing?
No. The finish is integral and wipe-clean, so there is no coating to maintain or reapply.
Will it warp like timber?
No. As a mineral-based panel it does not absorb moisture and move the way timber does, so it stays flat.
Can it be used on facades?
Yes. It is UV-stable and water-resistant. Detail fixing and drainage as you would for any exterior cladding and consult our technical team.
What tones are available?
The range includes oak and ash looks. Ask for a sample set to see the full tone card.
How heavy is it?
Around 1.2 kg per square metre at roughly 3 mm thick, so it adds very little load to walls.
Is it fire rated?
Yes, A2 fire reaction — suitable for interiors where a fire rating is required.
How is it installed?
Cut with a utility knife and set with a thin-set adhesive over a prepared substrate. No specialist timber tools needed.
Can I mix it with stone textures?
Yes. Many schemes pair Wood-Texture with Travertine or Rammed Earth for contrast. Ask our team for advice.
Have a project in mind?
Our team can help with samples, specifications and a quote.
Talk to our team →

