Antique finish specified for a Singapore hotel corridor

Why Antique for a corridor
Corridors take more wear than almost any other hotel surface: luggage, cleaning trolleys and constant traffic. The client wanted the warmth of an old-world plaster finish but could not afford the ongoing repairs that real plaster needs.
Antique delivers the aged look in a wipe-clean, water-resistant panel that holds up to daily traffic without chipping or discolouring.
The practical spec
At around 3 mm thick and 1.2 kg per square metre, the panels went up quickly over a prepared substrate with a thin-set adhesive. There were no grout lines to mix or re-point, which removed one of the most labour-heavy steps in a corridor refit.
The material carries an A2 fire reaction rating — important for a hotel corridor, which is part of the escape route.
600 sqm in one weekend
The installation team completed 600 sqm over a weekend, keeping the corridor out of service for the shortest possible window. Panels were batched together for colour consistency along the full 120 m run.
The result is a corridor that reads as a heritage finish but performs like a modern, low-maintenance wall system.
Key facts
- Antique aged-plaster look, maintenance-free
- A2 fire reaction — suited to escape corridors
- No grout lines to re-point
- 600 sqm installed over one weekend
Frequently asked questions
What does the Antique finish look like?
A warm, aged-plaster appearance with subtle tonal variation. It gives the character of an old wall in a consistent, modern panel.
Is it suitable for hotel corridors?
Yes. It is wipe-clean, water-resistant and rated A2 for fire reaction, which suits high-traffic corridors and escape routes.
Does it need grout?
No. Panels are butted with a fine joint, so there are no grout lines to mix, apply or re-point.
How fast can it be installed?
Very fast relative to tile or plaster. In this project the team installed 600 sqm over a single weekend.
Will it chip or crack with traffic?
The flexible substrate resists impact better than brittle plaster or tile, and the surface wipes clean rather than needing repair.
Iscolour consistent along a long corridor?
Yes. We batch the full run together and hold it to one dye lot so there is no visible banding along the wall.
Can it go over existing walls?
Provided the substrate is sound, flat and clean, panels can be set over it with a thin-set adhesive.
Is it available in other tones?
Yes. The Antique finish is part of a wider range; ask for a sample set to compare tones.
How do I clean it?
Wipe with a soft cloth and mild detergent. The non-porous surface does not absorb stains.
Can I request samples for a refurbishment?
Yes. Contact our team with your project details and we will send a sample set for approval.
Have a project in mind?
Our team can help with samples, specifications and a quote.
Talk to our team →

