A Contractor's Guide to Cutting and Trimming Flexible Stone Panels




Common Questions
Practical answers on what's — the details our clients ask us most.
What's the easiest way to cut flexible stone?
A scoring blade for sheets, or an angle-grinder cutting disc for boards. Cut clean, not by snapping.
Can I use a tile saw?
You can, but a flexible-blade or disc cuts faster and leaves a cleaner edge.
How do I cut a straight long seam?
Snap a line with a straightedge, score, then lift the panel off. Use a backer board to avoid chipping the edge.
What about rounded or shaped cuts?
Freehand with a small disc, or a jig + drill for holes. It follows curves well.
Do the cut edges need finishing?
Mostly no — the clay core is fine as a raw edge for internal use; cover external edges with a profile.
What's the kerf (cut width) to account for?
About 1–2 mm with a standard disc; add it to your template sizes.
Can I cut it with a hand saw?
For thin sheet, a fine-tooth saw works; for 3 mm boards use a disc or router for a clean edge.
How do I cut a hole for a socket or pipe?
Trace the fitting, drill the centre, then cut out with a small disc or hole-saw. Deburr the edge.
What PPE is required?
Dust mask, eye protection and gloves — the cut produces fine clay dust.
Can I repair a damaged panel on site?
Cut a clean rectangle, patch with a matching piece bonded flush, and fill the joints.