Specifying Flexible Stone for Exterior Facades: Wind Load & Rainscreen Details




Common Questions
Practical answers on what — the details our clients ask us most.
What wind load governs a rainscreen facade?
The local wind pressure at the building's height and exposure; we design the fixings to the worst case.
How is flexible stone fixed externally?
Adhesive to the substrate plus mechanical fixings at panel centres; spacing scales with wind zone.
What's a rainscreen detail?
A ventilated cavity behind the panel so any water that gets past it can drain and air out.
How wide should the cavity be?
Commonly 20–50 mm; confirm against your wind and drainage calculations.
Does it need a weep path?
Yes — provide horizontal drainage (weeps/shims) so trapped water escapes at the base of each course.
Which standards should I check?
ASTM and EN facade systems, plus your local wind and fire codes; we supply test evidence on request.
Can it survive coastal salt air?
The non-combustible clay core is not affected; use stainless fixings for the marine environment.
How do I handle thermal movement at joints?
Leave a movement joint every few panels and use a flexible sealant so the cavity can breathe.
What finish suits a high-facade exterior?
Travertine, stone and rammed-earth faces; choose a matte, textured finish to hide any weathering lines.
Who verifies the design?
Your engineer signs off the fixing layout; we provide the material's load and fire data.