Flexible Stone on Curved Walls




Common Questions
Practical answers on what — the details our clients ask us most.
What radius can I wrap with a standard panel?
~100 mm out of the box. Tighter radii are produced on request.
How do I form a concave curve?
Flex the panel cold — no pre-bending. For tight concave profiles we pre-curve the board to your template.
Do joints show more on curved surfaces?
Lap joints on curves can show slightly; stagger the seams and keep the lap within the same radius.
Can I do a full 360° cylinder?
Yes, in panels. We cut and wrap around columns, coves and tubs using a jig or hand-press.
What adhesive works on curves?
A flexible construction adhesive so the panel bends without cracking. Avoid rigid thin-set on tight radii.
How do I handle a convex archway?
Panel the convex face directly; for the soffit, cut and mitre the ends. We supply custom-profile boards on request.
Can flexible stone do free-form sculptural work?
Within reason, yes. The material drapes to double-curved surfaces with a backing support or adhesive.
What's the minimum bend before the core breaks?
Roughly 60–80 mm on a 3 mm panel; below that use the 2 mm sheet or a pre-formed part.
How do I finish an internal curved corner?
Mitre or lap with a small filler bead. We can supply pre-bent corner boards.
Will the curve hold or spring back?
It holds. The cured clay skin sets its shape; there's no meaningful memory like a springy metal.